All Jobs

    • Lancaster PA
      PA

    2nd Shift Forklift

    2nd Shift Forklift

    • York PA
      PA

     

    Responsibilities:

        Fabricate close tolerance tool components for progressive dies.  Interpret blueprints and design sketches to ensure the proper

         dimensions and tolerance levels of the finished product.  Surface grind flat, angle and contour surfaces to +.0001inch tolerances.

         Utilize inspection tools to measure tooling. Operate grinders, mills, lathes and similar tool room equipment to fabricate tooling.

          Receive and carry-out other duties as assigned by the Manufacturing Manager.

    Essential Duties: What has to be done to achieve the desired results of the job?

    • Manufacture tooling to print tolerances.
    • Utilize quality assurance practices and metrology equipment to ensure that tooling conforms to applicable design specifications.
    • Record and store die tooling in an efficient manner as they are fabricated.
    • Consult manager if any tooling may need to be modified from print and record modification.
    • Utilize good housekeeping practices to maintain a clean and safe work area.
    • Record die maintenance and preventive maintenance in Die Log Book in a timely and accurate manner

     

    Minimum Requirements: What is required to perform the Essential Duties?

    ·         High School Diploma or equivalent.

    ·         Must have completed an apprenticeship or have at least 5 years of experience in the field.

    ·         Familiar with a variety of concepts, practices and procedures.

    ·         Ability to perform basic math functions using whole numbers, fractions and decimals

                including metric /english conversion. A basic understanding of algebra and geometry.

    ·         Ability to read and interpret documents such as safety rules, set-up, operating and maintenance instructions.

    ·         Knowledge of measuring equipment usage, such as micrometer, caliper and optical comparator.

    ·         Blue print reading with geometric tolerances.

    ·         Ability to read die assemblies, change-over and detail prints from various sources.

    ·         Capable of writing routine correspondence and reports.

    ·         Ability to solve practical and mechanical problems (Mechanical aptitude).

    ·         Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.          

    ·         Must have the ability to successfully complete all training requirements as listed on training matrix for this position.

    ·         Must be available for scheduled work: normal work day of 8 hours or more as necessary, night shift

       and weekend work is possible.

     

    Responsibilities:

        Fabricate close tolerance tool components for progressive dies.  Interpret blueprints and design sketches to ensure the proper

         dimensions and tolerance levels of the finished product.  Surface grind flat, angle and contour surfaces to +.0001inch tolerances.

         Utilize inspection tools to measure tooling. Operate grinders, mills, lathes and similar tool room equipment to fabricate tooling.

          Receive and carry-out other duties as assigned by the Manufacturing Manager.

    Essential Duties: What has to be done to achieve the desired results of the job?

    • Manufacture tooling to print tolerances.
    • Utilize quality assurance practices and metrology equipment to ensure that tooling conforms to applicable design specifications.
    • Record and store die tooling in an efficient manner as they are fabricated.
    • Consult manager if any tooling may need to be modified from print and record modification.
    • Utilize good housekeeping practices to maintain a clean and safe work area.
    • Record die maintenance and preventive maintenance in Die Log Book in a timely and accurate manner

     

    Minimum Requirements: What is required to perform the Essential Duties?

    ·         High School Diploma or equivalent.

    ·         Must have completed an apprenticeship or have at least 5 years of experience in the field.

    ·         Familiar with a variety of concepts, practices and procedures.

    ·         Ability to perform basic math functions using whole numbers, fractions and decimals

                including metric /english conversion. A basic understanding of algebra and geometry.

    ·         Ability to read and interpret documents such as safety rules, set-up, operating and maintenance instructions.

    ·         Knowledge of measuring equipment usage, such as micrometer, caliper and optical comparator.

    ·         Blue print reading with geometric tolerances.

    ·         Ability to read die assemblies, change-over and detail prints from various sources.

    ·         Capable of writing routine correspondence and reports.

    ·         Ability to solve practical and mechanical problems (Mechanical aptitude).

    ·         Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.          

    ·         Must have the ability to successfully complete all training requirements as listed on training matrix for this position.

    ·         Must be available for scheduled work: normal work day of 8 hours or more as necessary, night shift

       and weekend work is possible.

    • Mount Joy
      PA

    1st Shift Mover Helper

     Pay - $15

    Mover help

     

    Expectations

    Reliable transportation

    Good attendance

    Be able to work 8 hours shifts.

    Job can be physical depending on assignment.

    Skills

    Read write and follow instructions.

    Keep organized.

    Teamwork.

    Positive attitude

     

     

    Physical requirements

    Physical Ability to lift 30 – 70 Lbs. alone and assist lifts.

    Stand for full shift.

    Walk full shift.

    Carry and Lift and Bend /twist.

    Pushing and Pulling

     

     

     

     

    Mover help

     

    Expectations

    Reliable transportation (terms can’t get in Company vehicles)

    Good attendance

    Be able to work 8 hours shifts.

    Job can be physical depending on assignment.

    Skills

    Read write and follow instructions.

    Keep organized.

    Teamwork.

    Positive attitude

     

     

     

    Physical requirements

    Physical Ability to lift 1-15 Lbs. alone.

    Stand for full shift.

    Walk full shift.

    Carry and Lift and Bend /twist.

    Pushing and Pulling

    1st Shift Mover Helper

     Pay - $15

    Mover help

     

    Expectations

    Reliable transportation

    Good attendance

    Be able to work 8 hours shifts.

    Job can be physical depending on assignment.

    Skills

    Read write and follow instructions.

    Keep organized.

    Teamwork.

    Positive attitude

     

     

    Physical requirements

    Physical Ability to lift 30 – 70 Lbs. alone and assist lifts.

    Stand for full shift.

    Walk full shift.

    Carry and Lift and Bend /twist.

    Pushing and Pulling

     

     

     

     

    Mover help

     

    Expectations

    Reliable transportation (terms can’t get in Company vehicles)

    Good attendance

    Be able to work 8 hours shifts.

    Job can be physical depending on assignment.

    Skills

    Read write and follow instructions.

    Keep organized.

    Teamwork.

    Positive attitude

     

     

     

    Physical requirements

    Physical Ability to lift 1-15 Lbs. alone.

    Stand for full shift.

    Walk full shift.

    Carry and Lift and Bend /twist.

    Pushing and Pulling

    • Sparks
      NV

    1st Shift - Production Mon-Friday

    Knowledge of raw materials, production process, quality control and costs, knowledge of hand tools and equipment is preferred.  Knowledge of specific and general safety policies and procedures as relates to the plant and the position is preferred.

     

    Essential Duties

    • Responsible for tying or assisting with tying material onto racks with wire or chain for safe movement through the galvanizing process.
    • Use wire to tie material to bow racks, universal racks, or other tooling to prepare for the pickling tanks using specific training methods for the galvanizing process.
    • Use rope to lift and prepare material for the pickling tanks using specific training methods for galvanizing process.
    • Operates and visually inspects all equipment (i.e. forklifts, cranes, tooling, etc.) prior to usage to ensure no maintenance is needed.
    • Learns to rack a variety of materials by assisting others.
    • Racks, unracks or cleans material in order as directed.
    • May learn to use a torch to dry materials before hot dipping.
    • May clean material using a grinder, file, or brush as specified by the customer.
    • Inspects material for sags, runs, drips, bare spots and reports it to management.
    • Uses bolt cutters to remove wire from product and tooling and disposes of it per established procedures.
    • Learns to inspect materials for holes, smothered spots, etc.
    • Perform housekeeping activities to keep production area and equipment clean and organized.
    • Confers with supervisors to report material conditions that could result in production or customer problems by form of damage or quality issues.
    • May assist with training new production helpers as specified by management.
    • Required to wear protective equipment, follow safety rules and all company policies and procedures.

     

    Physical Demands

    Majority of the time is spent standing, walking, stooping, reaching, and bending. Must be capable of lifting up to 50 lbs. Must have good eye hand coordination.

     

     

    1st Shift - Production Mon-Friday

    Knowledge of raw materials, production process, quality control and costs, knowledge of hand tools and equipment is preferred.  Knowledge of specific and general safety policies and procedures as relates to the plant and the position is preferred.

     

    Essential Duties

    • Responsible for tying or assisting with tying material onto racks with wire or chain for safe movement through the galvanizing process.
    • Use wire to tie material to bow racks, universal racks, or other tooling to prepare for the pickling tanks using specific training methods for the galvanizing process.
    • Use rope to lift and prepare material for the pickling tanks using specific training methods for galvanizing process.
    • Operates and visually inspects all equipment (i.e. forklifts, cranes, tooling, etc.) prior to usage to ensure no maintenance is needed.
    • Learns to rack a variety of materials by assisting others.
    • Racks, unracks or cleans material in order as directed.
    • May learn to use a torch to dry materials before hot dipping.
    • May clean material using a grinder, file, or brush as specified by the customer.
    • Inspects material for sags, runs, drips, bare spots and reports it to management.
    • Uses bolt cutters to remove wire from product and tooling and disposes of it per established procedures.
    • Learns to inspect materials for holes, smothered spots, etc.
    • Perform housekeeping activities to keep production area and equipment clean and organized.
    • Confers with supervisors to report material conditions that could result in production or customer problems by form of damage or quality issues.
    • May assist with training new production helpers as specified by management.
    • Required to wear protective equipment, follow safety rules and all company policies and procedures.

     

    Physical Demands

    Majority of the time is spent standing, walking, stooping, reaching, and bending. Must be capable of lifting up to 50 lbs. Must have good eye hand coordination.

     

     

    • Hayward
      CA

    Job Title: Machine Operator/ Pasteurizer

     

    Responsibilities:

    The Machine Operator/Pasteurizer is responsible for running and maintaining pasteurizer and other related equipment within a nut milk production environment.

     

     

    Essential Duties:

    ·       High responsibility: Responsible for quality, food safety and product specifications

    ·       Closely monitor the production process and follow Standard Operating Procedures for batching and processing products

    ·       Monitor fats and proteins as they associate with processing milk

    ·       Calculate recipes for standardization, inoculation

    ·       Prepare cultures and enzymes according to the various recipes and inoculate the milk

    Experience and Requirements:

     

    ·       Experience in pasteurizing milk pasteurizing, juice, sauces or other liquids

    ·       Must be comfortable working in a fast-paced, wet, warm environment

    ·       Must be able to work 8-hour days  

    ·       Must be able to work overtime and weekends.

    ·       Must be able to lift to 50 lbs., as needed.

     

     

    Shifts Available:

    6:00 a.m. -2:30p.m.

    2:00 p.m. – 10:30 a.m.

     

    Salary: $21.42- $22.42 depending on shift

     

    Chartwell Staffing Solutions is an Equal Opportunity Employer

    Job Title: Machine Operator/ Pasteurizer

     

    Responsibilities:

    The Machine Operator/Pasteurizer is responsible for running and maintaining pasteurizer and other related equipment within a nut milk production environment.

     

     

    Essential Duties:

    ·       High responsibility: Responsible for quality, food safety and product specifications

    ·       Closely monitor the production process and follow Standard Operating Procedures for batching and processing products

    ·       Monitor fats and proteins as they associate with processing milk

    ·       Calculate recipes for standardization, inoculation

    ·       Prepare cultures and enzymes according to the various recipes and inoculate the milk

    Experience and Requirements:

     

    ·       Experience in pasteurizing milk pasteurizing, juice, sauces or other liquids

    ·       Must be comfortable working in a fast-paced, wet, warm environment

    ·       Must be able to work 8-hour days  

    ·       Must be able to work overtime and weekends.

    ·       Must be able to lift to 50 lbs., as needed.

     

     

    Shifts Available:

    6:00 a.m. -2:30p.m.

    2:00 p.m. – 10:30 a.m.

     

    Salary: $21.42- $22.42 depending on shift

     

    Chartwell Staffing Solutions is an Equal Opportunity Employer

    • West Sacamento
      CA

    This position's duties include driving the stand up forklift, order picking, inventory management, help unload containers, housekeeping, etc.

    Monday to Friday 7AM to 3:30PM. Pay of $18.00 Per Hour. 

    Location in West Sacramento, CA 95691

    This position's duties include driving the stand up forklift, order picking, inventory management, help unload containers, housekeeping, etc.

    Monday to Friday 7AM to 3:30PM. Pay of $18.00 Per Hour. 

    Location in West Sacramento, CA 95691

    • Ephrata
      PA

    2nd Shift (P/T) Packer

    2nd Shift (P/T) Packer

    • Ontario Ca
      CA

    Shipping Clerk Pay: $19.50

    Monday-Thursday 7:30am to 4:00pm Friday-5:00am to 1:30pm

    Primary Responsibilities:

    • Prepare and complete orders for delivery or pickup according to schedule (load, pack, wrap, label, ship)
    • Shipping ups parcels
    • Warehouse equipment experience
    • Receive and process warehouse stock products (pick, unload, label, store)
    • Perform inventory control and keep quality standards high for audits
    • Keep a clean and safe working environment; optimize space utilization
    • Report any inventory discrepancies
    • Operate stand up reach, sit down FL and order picker.
    • Follow quality service standards and comply with procedures, rules, and regulations
    • Open to placement in different warehouse roles (receiving, inventory, picking, shipping) to meet business needs
    • Other duties as assigned

    Skills & Experience

    • High school degree or equivalent
    • Familiarity with computers
    • Proven work experience as a warehouse worker
    • RF Gun Experience
    • Familiarity with modern warehousing practices and methods
    • Ability to lift up to 50 pounds

    Shipping Clerk Pay: $19.50

    Monday-Thursday 7:30am to 4:00pm Friday-5:00am to 1:30pm

    Primary Responsibilities:

    • Prepare and complete orders for delivery or pickup according to schedule (load, pack, wrap, label, ship)
    • Shipping ups parcels
    • Warehouse equipment experience
    • Receive and process warehouse stock products (pick, unload, label, store)
    • Perform inventory control and keep quality standards high for audits
    • Keep a clean and safe working environment; optimize space utilization
    • Report any inventory discrepancies
    • Operate stand up reach, sit down FL and order picker.
    • Follow quality service standards and comply with procedures, rules, and regulations
    • Open to placement in different warehouse roles (receiving, inventory, picking, shipping) to meet business needs
    • Other duties as assigned

    Skills & Experience

    • High school degree or equivalent
    • Familiarity with computers
    • Proven work experience as a warehouse worker
    • RF Gun Experience
    • Familiarity with modern warehousing practices and methods
    • Ability to lift up to 50 pounds
    • Hayward
      CA

    Position: Class “C” Drivers who will be dedicated and team players.

    Essential Duties and Responsibilities include the following.

    ·        Obtains routing information for day

    ·        Valid California Class C license

    ·        Performs safety and operational inspection of vehicle before and after route.

    ·        Drives the truck within a prescribed route in accordance with the routing schedule, delivering product based on the customer’s order, following the Food Safety Guidelines (HACCP).

    ·        Maintains vehicle in clean and safe operating condition, notifying appropriate personnel of any mechanical repairs.

    ·        Operates in a safe and efficient manner.

    ·        Attends various meetings regarding safety, training updates, etc. as required.

    ·        Operate a computer and programs in relation to role responsibilities.

    ·        Read and write English at a level sufficient to perform required duties.

    ·        Understand and carry out oral and written instructions.

    ·        Maintain accurate records.

    ·        Operate a variety of machines and equipment including pallet jacks, fork lifts, hand trucks, etc..

    ·        Establish and maintain effective work relationships with those contacted in the performance of required duties.

    ·        Must be also to sit in a vehicle for up to 6 to 8 hours per day

    ·        Must be able to stoop, bend, stretch and squat to load and unload cargo areas.

    ·        Must be able to lift up to 50 pounds

    ·        May be exposed to the elements (rain, cold, heat) for short periods of time.

     

    Hourly Pay Rate: $20.00 to $22.00 /hour

    Chartwell Staffing Solutions is an Equal Opportunity Employer

     

    Position: Class “C” Drivers who will be dedicated and team players.

    Essential Duties and Responsibilities include the following.

    ·        Obtains routing information for day

    ·        Valid California Class C license

    ·        Performs safety and operational inspection of vehicle before and after route.

    ·        Drives the truck within a prescribed route in accordance with the routing schedule, delivering product based on the customer’s order, following the Food Safety Guidelines (HACCP).

    ·        Maintains vehicle in clean and safe operating condition, notifying appropriate personnel of any mechanical repairs.

    ·        Operates in a safe and efficient manner.

    ·        Attends various meetings regarding safety, training updates, etc. as required.

    ·        Operate a computer and programs in relation to role responsibilities.

    ·        Read and write English at a level sufficient to perform required duties.

    ·        Understand and carry out oral and written instructions.

    ·        Maintain accurate records.

    ·        Operate a variety of machines and equipment including pallet jacks, fork lifts, hand trucks, etc..

    ·        Establish and maintain effective work relationships with those contacted in the performance of required duties.

    ·        Must be also to sit in a vehicle for up to 6 to 8 hours per day

    ·        Must be able to stoop, bend, stretch and squat to load and unload cargo areas.

    ·        Must be able to lift up to 50 pounds

    ·        May be exposed to the elements (rain, cold, heat) for short periods of time.

     

    Hourly Pay Rate: $20.00 to $22.00 /hour

    Chartwell Staffing Solutions is an Equal Opportunity Employer