All Jobs
-
-
York PA,PA
Responsibilities:
Fabricate close tolerance tool components for progressive dies. Interpret blueprints and design sketches to ensure the proper
dimensions and tolerance levels of the finished product. Surface grind flat, angle and contour surfaces to +.0001inch tolerances.
Utilize inspection tools to measure tooling. Operate grinders, mills, lathes and similar tool room equipment to fabricate tooling.
Receive and carry-out other duties as assigned by the Manufacturing Manager.
Essential Duties: What has to be done to achieve the desired results of the job?
- Manufacture tooling to print tolerances.
- Utilize quality assurance practices and metrology equipment to ensure that tooling conforms to applicable design specifications.
- Record and store die tooling in an efficient manner as they are fabricated.
- Consult manager if any tooling may need to be modified from print and record modification.
- Utilize good housekeeping practices to maintain a clean and safe work area.
- Record die maintenance and preventive maintenance in Die Log Book in a timely and accurate manner
Minimum Requirements: What is required to perform the Essential Duties?
· High School Diploma or equivalent.
· Must have completed an apprenticeship or have at least 5 years of experience in the field.
· Familiar with a variety of concepts, practices and procedures.
· Ability to perform basic math functions using whole numbers, fractions and decimals
including metric /english conversion. A basic understanding of algebra and geometry.
· Ability to read and interpret documents such as safety rules, set-up, operating and maintenance instructions.
· Knowledge of measuring equipment usage, such as micrometer, caliper and optical comparator.
· Blue print reading with geometric tolerances.
· Ability to read die assemblies, change-over and detail prints from various sources.
· Capable of writing routine correspondence and reports.
· Ability to solve practical and mechanical problems (Mechanical aptitude).
· Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
· Must have the ability to successfully complete all training requirements as listed on training matrix for this position.
· Must be available for scheduled work: normal work day of 8 hours or more as necessary, night shift
and weekend work is possible.
posted june 7, 2023Responsibilities:
Fabricate close tolerance tool components for progressive dies. Interpret blueprints and design sketches to ensure the proper
dimensions and tolerance levels of the finished product. Surface grind flat, angle and contour surfaces to +.0001inch tolerances.
Utilize inspection tools to measure tooling. Operate grinders, mills, lathes and similar tool room equipment to fabricate tooling.
Receive and carry-out other duties as assigned by the Manufacturing Manager.
Essential Duties: What has to be done to achieve the desired results of the job?
- Manufacture tooling to print tolerances.
- Utilize quality assurance practices and metrology equipment to ensure that tooling conforms to applicable design specifications.
- Record and store die tooling in an efficient manner as they are fabricated.
- Consult manager if any tooling may need to be modified from print and record modification.
- Utilize good housekeeping practices to maintain a clean and safe work area.
- Record die maintenance and preventive maintenance in Die Log Book in a timely and accurate manner
Minimum Requirements: What is required to perform the Essential Duties?
· High School Diploma or equivalent.
· Must have completed an apprenticeship or have at least 5 years of experience in the field.
· Familiar with a variety of concepts, practices and procedures.
· Ability to perform basic math functions using whole numbers, fractions and decimals
including metric /english conversion. A basic understanding of algebra and geometry.
· Ability to read and interpret documents such as safety rules, set-up, operating and maintenance instructions.
· Knowledge of measuring equipment usage, such as micrometer, caliper and optical comparator.
· Blue print reading with geometric tolerances.
· Ability to read die assemblies, change-over and detail prints from various sources.
· Capable of writing routine correspondence and reports.
· Ability to solve practical and mechanical problems (Mechanical aptitude).
· Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
· Must have the ability to successfully complete all training requirements as listed on training matrix for this position.
· Must be available for scheduled work: normal work day of 8 hours or more as necessary, night shift
and weekend work is possible.
-
-
-
Ephrata,PA
2nd Shift (P/T) Packer
posted june 7, 20232nd Shift (P/T) Packer
-
-
-
Mount Joy,PA
1st Shift Mover Helper
Pay - $15
Mover help
Expectations
Reliable transportation
Good attendance
Be able to work 8 hours shifts.
Job can be physical depending on assignment.
Skills
Read write and follow instructions.
Keep organized.
Teamwork.
Positive attitude
Physical requirements
Physical Ability to lift 30 – 70 Lbs. alone and assist lifts.
Stand for full shift.
Walk full shift.
Carry and Lift and Bend /twist.
Pushing and Pulling
Mover help
Expectations
Reliable transportation (terms can’t get in Company vehicles)
Good attendance
Be able to work 8 hours shifts.
Job can be physical depending on assignment.
Skills
Read write and follow instructions.
Keep organized.
Teamwork.
Positive attitude
Physical requirements
Physical Ability to lift 1-15 Lbs. alone.
Stand for full shift.
Walk full shift.
Carry and Lift and Bend /twist.
Pushing and Pulling
posted june 7, 20231st Shift Mover Helper
Pay - $15
Mover help
Expectations
Reliable transportation
Good attendance
Be able to work 8 hours shifts.
Job can be physical depending on assignment.
Skills
Read write and follow instructions.
Keep organized.
Teamwork.
Positive attitude
Physical requirements
Physical Ability to lift 30 – 70 Lbs. alone and assist lifts.
Stand for full shift.
Walk full shift.
Carry and Lift and Bend /twist.
Pushing and Pulling
Mover help
Expectations
Reliable transportation (terms can’t get in Company vehicles)
Good attendance
Be able to work 8 hours shifts.
Job can be physical depending on assignment.
Skills
Read write and follow instructions.
Keep organized.
Teamwork.
Positive attitude
Physical requirements
Physical Ability to lift 1-15 Lbs. alone.
Stand for full shift.
Walk full shift.
Carry and Lift and Bend /twist.
Pushing and Pulling
-
-
-
Lancaster PA,PA
2nd Shift Forklift
posted june 7, 20232nd Shift Forklift
-
-
-
York,PA
Quality Engineer
Quality Engineer Responsibilities:
· Lead Continuous Improvement Team using LEAN tools, driving quality, delivery and productivity improvement across all functions of the facility
· Drive corrective action identification and implementation for all confirmed quality issues, using 8D, PPSR and other applicable processes
· Lead FMEA teams as needed, including action implementation and verification.
· Process all First Article and PPAPs as needed for new and transfer tools
· Support audits (customer and industrial) as needed
· Act as primary contact for customers on quality inquiries.
· Interface with suppliers to drive corrective actions as needed.
Quality Engineer Qualifications:
· Associates or Bachelors in engineering or equivalent experience
· Experience in connector industry desired but not required.
· Excellent written and oral communication skills, including telephone conversation skills.
· High ability to work with Microsoft Office suite of tools (Word, Outlook, Excel, Power point) required.
· Experience working with progressive stamping dies desired, but not required.
· Job Type: Full time position available - 1st shift
· Pay: $ Consummerate with experience
Application Questions
Requested that candidates answer the following questions:posted june 7, 2023Quality Engineer
Quality Engineer Responsibilities:
· Lead Continuous Improvement Team using LEAN tools, driving quality, delivery and productivity improvement across all functions of the facility
· Drive corrective action identification and implementation for all confirmed quality issues, using 8D, PPSR and other applicable processes
· Lead FMEA teams as needed, including action implementation and verification.
· Process all First Article and PPAPs as needed for new and transfer tools
· Support audits (customer and industrial) as needed
· Act as primary contact for customers on quality inquiries.
· Interface with suppliers to drive corrective actions as needed.
Quality Engineer Qualifications:
· Associates or Bachelors in engineering or equivalent experience
· Experience in connector industry desired but not required.
· Excellent written and oral communication skills, including telephone conversation skills.
· High ability to work with Microsoft Office suite of tools (Word, Outlook, Excel, Power point) required.
· Experience working with progressive stamping dies desired, but not required.
· Job Type: Full time position available - 1st shift
· Pay: $ Consummerate with experience
Application Questions
Requested that candidates answer the following questions: -
-
-
Lancaster,PA
Eurofins Job Title Lab Technician 2 Job Description Summary: The main function of a lab technician is to support laboratory operations through general maintenance of laboratory and supply storage areas, equipment, instruments, and supplies. The typical lab technician is expected to use general lab methods, techniques, equipment, and instrumentation in compliance with quality assurance programs and standard operating procedures. Job Responsibilities: - Retrieve samples from Sample Control for analysis - Perform sample preparation including but not limited to: aliquot samples, spike and trace samples, prepare reagents, bottle samples, prepare concentrations, separation, sonication, liquid rack set up - Resolve discrepancies and anomalies to ensure samples are properly labeled - Prepare general lab paperwork such as recording analysis results, tracking samples, bench sheets, and lab logbooks - Wash lab glassware to prepare for next day?s samples - stock lab supplies Skills: - Verbal and written communication skills, attention to detail, and problem solving skills - Basic ability to work independently and manage one?s time - Basic knowledge of the information and techniques for lab testing - Basic ability to analyze data and accurately document and record results. Education/Experience: - High school diploma or GED required. - 2-4 years experience required
posted june 7, 2023Eurofins Job Title Lab Technician 2 Job Description Summary: The main function of a lab technician is to support laboratory operations through general maintenance of laboratory and supply storage areas, equipment, instruments, and supplies. The typical lab technician is expected to use general lab methods, techniques, equipment, and instrumentation in compliance with quality assurance programs and standard operating procedures. Job Responsibilities: - Retrieve samples from Sample Control for analysis - Perform sample preparation including but not limited to: aliquot samples, spike and trace samples, prepare reagents, bottle samples, prepare concentrations, separation, sonication, liquid rack set up - Resolve discrepancies and anomalies to ensure samples are properly labeled - Prepare general lab paperwork such as recording analysis results, tracking samples, bench sheets, and lab logbooks - Wash lab glassware to prepare for next day?s samples - stock lab supplies Skills: - Verbal and written communication skills, attention to detail, and problem solving skills - Basic ability to work independently and manage one?s time - Basic knowledge of the information and techniques for lab testing - Basic ability to analyze data and accurately document and record results. Education/Experience: - High school diploma or GED required. - 2-4 years experience required
-
-
-
ABBOTTSTOWN,PA
Our Sanitation Workers are reliable team members responsible for cleaning and sanitizing the facility, equipment, and machinery to prepare for production and ensure food safety. Responsibilities: • Properly dispose of waste and perform proper chemical application for cleaning and sanitizing • Properly sanitize equipment, follow proper allergen sanitizing of equipment and follow allergen testing procedures • Follow all guidelines and instructions contained in the company master sanitation manual for proper cleanup procedures • Eliminate all possible sources of product contamination, infestations or unsanitary conditions and protect all raw materials from contamination during storage • Perform sanitation of facility, equipment and food manufacturing facility while following good manufacturing practices Required Skills: • No prior experience needed (We will do the training!) • Team players • Ability to communicate • Ability and willing to work overtime as needed
posted june 7, 2023Our Sanitation Workers are reliable team members responsible for cleaning and sanitizing the facility, equipment, and machinery to prepare for production and ensure food safety. Responsibilities: • Properly dispose of waste and perform proper chemical application for cleaning and sanitizing • Properly sanitize equipment, follow proper allergen sanitizing of equipment and follow allergen testing procedures • Follow all guidelines and instructions contained in the company master sanitation manual for proper cleanup procedures • Eliminate all possible sources of product contamination, infestations or unsanitary conditions and protect all raw materials from contamination during storage • Perform sanitation of facility, equipment and food manufacturing facility while following good manufacturing practices Required Skills: • No prior experience needed (We will do the training!) • Team players • Ability to communicate • Ability and willing to work overtime as needed
-
-
-
ABBOTTSTOWN,PA
ESSENTIAL JOB FUNCTIONS • Prepare cardboard trays for product packing by supplying the packing station, stapling carton ends together, and placing trays on the work table; operates tray making or stapling machine • Fill cartons / display cartons appropriately. Ensures that products are packaged in boxed with appropriate corresponding labels; places proper quantities of product in each carton / tray; properly packs bags; tapes and seals cartons • Inspect final product before packing by checking bag weights, codes and prices, bag and caddy seals. • Remove unsuitable product and communicates persistent packaging problems to supervisor • Adhere to Pretzel oven operations including oven control adjustment to meet moisture specifications • Caustic cooker operations including cooker control adjustment to meet color / pH specifications • Follow proper Good Manufacturing Practice (GMP) and standards and report violations • Follow safety procedures and report violations of safety procedures • Basic troubleshooting and troubleshoot equipment for maximum efficiency • Ensure that work areas are cleaned up at end of shift each day and helps prepare lines for next day’s production or for next shifts production EDUCATION AND EXPERIENCE • High school diploma or equivalent required REQUIRED SKILLS AND ABILITIES • Team player • Time management • Communication • Able and willing to work overtime as needed
posted june 7, 2023ESSENTIAL JOB FUNCTIONS • Prepare cardboard trays for product packing by supplying the packing station, stapling carton ends together, and placing trays on the work table; operates tray making or stapling machine • Fill cartons / display cartons appropriately. Ensures that products are packaged in boxed with appropriate corresponding labels; places proper quantities of product in each carton / tray; properly packs bags; tapes and seals cartons • Inspect final product before packing by checking bag weights, codes and prices, bag and caddy seals. • Remove unsuitable product and communicates persistent packaging problems to supervisor • Adhere to Pretzel oven operations including oven control adjustment to meet moisture specifications • Caustic cooker operations including cooker control adjustment to meet color / pH specifications • Follow proper Good Manufacturing Practice (GMP) and standards and report violations • Follow safety procedures and report violations of safety procedures • Basic troubleshooting and troubleshoot equipment for maximum efficiency • Ensure that work areas are cleaned up at end of shift each day and helps prepare lines for next day’s production or for next shifts production EDUCATION AND EXPERIENCE • High school diploma or equivalent required REQUIRED SKILLS AND ABILITIES • Team player • Time management • Communication • Able and willing to work overtime as needed
-
-
-
Denver,PA
GENERAL SUMMARY
The Production Associate I is responsible for basic production work in one of the following work areas: Assembly, Coil/Print or Finishing. This position can be given direction and complete all assembly tasks within time requirements. The position always requires the individual to have safety consciousness and comply with all environmental, health and safety (E.H.S) procedures. Successful candidates must be able to follow company policies, procedures, and work instructions to meet quality and productivity expectations; communicate and work with fellow employees; assist in organizing workload.
ESSENTIAL DUTIES & RESPONSIBILITIES
• Basic production assembly process which can include cut cable and cords of varying size and quantities, assembly of components, and labeling of finished goods. Basic knowledge of all relevant production processes and ability to complete assigned tasks as needed.
• Basic tow motor operation
• Basic scan gun processing to label products for further processing, storage, or shipping. This includes issue/receipt and conversion.
• Producing quality and accurate assembled products
• Basic packaging and labeling of finished products
• Responsible for maintaining a clean and organized work area
EDUCATION & SKILLS REQUIREMENTS
• High school diploma or GED
• Ability to read and interpret routine instructions
• Ability to perform basic mathematical calculations
• Organized with the ability to problem solve in an industrial environment
• Ability to operate material movement and packaging equipment
WORKING CONDITIONS
• Ability to use hands and fingers.
• Ability to see, hear and talk. Ability to distinguish colors. Eye protection is required provided by the company.
• Ability to work in light to moderate noise levels where hearing protection is required.
• May work near moving mechanical parts and may be exposed to airborne particles and vibration.
• Good hand/eye coordination and manual dexterity for repetitive tasks.
• Ability to lift/move up to 50 lbs. Push/pull items up to 250 lbs. with assistance.
• Walk up to 400 yards to work and break areas.
• May ascends/descends steps to and from work and break areas.
• Repetitive reaching with hands/arms overhead, under and across throughout shift.
• Repetitive bending, stooping, and twisting throughout shift.
posted june 7, 2023GENERAL SUMMARY
The Production Associate I is responsible for basic production work in one of the following work areas: Assembly, Coil/Print or Finishing. This position can be given direction and complete all assembly tasks within time requirements. The position always requires the individual to have safety consciousness and comply with all environmental, health and safety (E.H.S) procedures. Successful candidates must be able to follow company policies, procedures, and work instructions to meet quality and productivity expectations; communicate and work with fellow employees; assist in organizing workload.
ESSENTIAL DUTIES & RESPONSIBILITIES
• Basic production assembly process which can include cut cable and cords of varying size and quantities, assembly of components, and labeling of finished goods. Basic knowledge of all relevant production processes and ability to complete assigned tasks as needed.
• Basic tow motor operation
• Basic scan gun processing to label products for further processing, storage, or shipping. This includes issue/receipt and conversion.
• Producing quality and accurate assembled products
• Basic packaging and labeling of finished products
• Responsible for maintaining a clean and organized work area
EDUCATION & SKILLS REQUIREMENTS
• High school diploma or GED
• Ability to read and interpret routine instructions
• Ability to perform basic mathematical calculations
• Organized with the ability to problem solve in an industrial environment
• Ability to operate material movement and packaging equipment
WORKING CONDITIONS
• Ability to use hands and fingers.
• Ability to see, hear and talk. Ability to distinguish colors. Eye protection is required provided by the company.
• Ability to work in light to moderate noise levels where hearing protection is required.
• May work near moving mechanical parts and may be exposed to airborne particles and vibration.
• Good hand/eye coordination and manual dexterity for repetitive tasks.
• Ability to lift/move up to 50 lbs. Push/pull items up to 250 lbs. with assistance.
• Walk up to 400 yards to work and break areas.
• May ascends/descends steps to and from work and break areas.
• Repetitive reaching with hands/arms overhead, under and across throughout shift.
• Repetitive bending, stooping, and twisting throughout shift.
-